Digestion tank, including tanks, tank insulation layer and the support bracket and mixing mechanism of tank, the described with feed port and discharging port on the tanks, described including mixing agitator motor and mixing impeller, described mixing motor installed on the top of the tank, the stirring shaft through the shell of tank and tank capacity chamber agitation impeller fixed connection, as described on the discharge set has a discharge valve of tank; Its characteristics is described below the discharge valve outlet is equipped with perpendicular to the discharge control valve channel discharge pipe, the discharge pipe and the discharge control valve which penetration and fixed connection; It is of the discharge tube equipped with screw, the screw fixed connection with a motor shaft, described one end of the motor installed in the discharge tube.
Digestion tank application:
Health level digestion tank is fully enclosed vertical three layer structure, with functions of heating, cooling and heat preservation, stirring. Widely used in the dairy, food, biological engineering, beverage, wine, daily chemical industry such as mixing, enzyme solution.
Digestion tank technology and structure of performance:
1. Volume: according to the requirements;
2. Within the tanks: mirror polishing treatment on the inner surface roughness Ra < 0.4 microns;
3. Jacketed forms: the whole jacket, half circular pipe jacket, honeycomb jacket;
4. Thermal insulation material: fill the pearl cotton, rock wool, or casting polyurethane foam;
5. The outer shell surface treatment: mirror polish or 2 b or primary inferior smooth sandblasting processing;
6. Stir speed: 12 ~ 150 r/min speed or configuration stepless speed regulation and frequency control of motor speed;
7. Liquid level gauge forms: glass tube liquid level meter, static pressure sensor type level gauge, ultrasonic level meter, radio-frequency capacitive level;
8. Equipment: quick open manhole, sight glasses, thermometer (digital display type or dial), sampling mouth, air respirator, CIP cleaning device, spare mouth, import and export of material liquid, steam cooling water import and export and import and export, etc.;
9. Material: in the tanks SUS304 or SUS316L; Jacket and the outer shell of protection for the SUS304.
10. The in and out of nozzle hole, sight glasses, manhole and tanks welds adopt flanging process within the circular arc transition, smooth and easy to clean with no dead Angle, beautiful appearance;