Reaction kettle by kettle body, kettle cover, jacket, mixer, gear, shaft sealing device, bearing, etc. High mixing plant in diameter is larger, the multi-layer stirring blades are available, and also can be arbitrarily selected according to the user's requirements. Kettle set jacket outside the wall, or in the internal displacement hot surface, also may carry on the heat transfer through the outer loop. With supporting or ear type bearing, etc. Speed should be used more than 160 turn above gear speed reducer. Opening quantity, specifications or other requirements can be designed according to user requirements and production.
Reaction kettle generalized understanding that has a physical or chemical reaction of the stainless steel container, according to the requirements of different process conditions of the container structure design and parameter configuration, design conditions, procedures, inspection and manufacture, test based on relevant technical standards, in order to realize the process requirement of cooling and heating, evaporation, low speed of mixed reaction function.
Reaction kettle material generally have carbon manganese steel, stainless steel, zirconium, nickel base (hartz, monel alloy and other composite materials. The reaction kettle can use SUS304, such as SUS316L stainless steel materials. Agitator has anchor type, frame, paddle, turbine, scraper, modular, rotating mechanism can use cycloidal reducer, stepless speed reducer or the frequency control of motor speed, etc., can meet the special response requirements of various materials. Sealing device can adopt mechanical seal, packing seal structure, etc. Heating, cooling jacket can be used, half pipe, coil, miller board structure, such as heating mode are: steam, electric heating, heat conduction oil, in order to meet the acid and high temperature resistance, wear resistance, corrosion resistance of different working conditions, such as process needs. And we can also design and manufacture according to the needs of the user process.
Applicable scope: is suitable for the petroleum, chemical industry, medicine, metallurgy, scientific research, colleges and departments such as high temperature and high pressure chemical reaction experiment was carried out, and used to complete the hydrolysis, neutralization, crystallization, distillation, evaporation and storage, hydrogenated, alkylation, polymerization, condensation, heating mixed, thermostatic reaction process, such as the viscous and particles of the material can achieve high mixing effect.
1. Under the condition of normal pressure or low pressure usually USES the packing seal, generally use the pressure is less than 2 kg.
2. In general medium pressure or vacuum conditions can use mechanical seal, general pressure for negative pressure or 4 kg.
3. In the case of high or medium volatile higher will use magnetic seal, general pressure more than 14 kg. In addition to the magnetic seal adopts water cooling, other forms of seal in more than 120 degrees can increase the cooling jacket.
參數(shù) 型號 | FY100 | FY200 | FY500 | FY1000 | FY1500 | FY2000 | FY2500 | FY3000 | FY4000 | FY5000 |
容積L | 100 | 200 | 500 | 1000 | 1500 | 2000 | 2500 | 3000 | 4000 | 5000 |
公稱直徑mm | 500 | 600 | 800 | 1000 | 1200 | 1200 | 1400 | 1400 | 1500 | 1600 |
釜內(nèi)公稱壓力MPa | 0.25-0.5 | 0.25-0.5 | 0.25-0.5 | 0.25-0.5 | 0.25-0.5 | 0.25-0.5 | 0.25-0.5 | 0.25-0.5 | 0.25-0.5 | 0.25-0.5 |
夾套公稱壓力MPa | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 |
電機(jī)功率KW | 1.1 | 1.5 | 2.2 | 4.0 | 4.0 | 4.0 | 5.5 | 5.5 | 5.5 | 7.5 |
攪拌轉(zhuǎn)速rpm | 37-200 | 37-200 | 37-200 | 37-200 | 37-200 | 37-200 | 37-200 | 37-200 | 37-200 | 37-200 |